HP Color LaserJet Enterprise MFP M680 Series — Clear staple jams in the stapling mailbox accessory

Go back

Control panel walkaround
  • HP Color LaserJet MFP M680 control panel
  • Control panel poster
Guides
  • Control Panel Guide
  • User Guide
HP Color LaserJet MFP M680 CSR parts
  • Staple cartridge
Load the paper trays
  • Load Tray 1
  • Load Tray 2 and the 500-sheet trays
  • Load the 1500-sheet high-capacity input tray
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams from Tray 2 other 500-sheet trays
  • Clear jams in the 1,500-sheet high-capacity input tray and the lower-right door
  • Clear jams in the lower-right door
  • Clear jams in the right door and the fuser area
  • Clear jams in the output bin
  • Clear jams in the document feeder
  • Clear jams from under the top cover
  • Clear paper jams in the stapling mailbox accessory
  • Clear staple jams in the stapling mailbox accessory
  • Clean the scanner and white backing (MFP M680)
  • Clean the document feeder pickup rollers and separation pad (MFP M680)
Product views - HP Color LaserJet MFP M680
  • Product front view
  • Product back view
  • Formatter view
Quick Sets
  • Use a Quick Set
Save to SharePoint® (MFP M680z)
  • Use Save to SharePoint®
Shared CSR parts
  • Toner cartridges
  • Toner collection unit (TCU)
  • Intermediate transfer belt (ITBU)
Standard scan/send features
  • Send a scanned document to one or more email addresses
  • Send a scanned document to a network folder

Use the following procedure to check for staples jammed in the stapling mailbox accessory. When a jam occurs, the control panel displays an animation that assists in clearing the jam.

  1. Lift the gray latch on the front of the stapler, and open the stapler cover.
  2. Lift the green tab on the staple cartridge up, and then pull the staple cartridge straight out.
  3. Lift up on the small lever at the back of the staple cartridge.
  4. Remove the jammed staples.
  5. Close the lever at the back of the staple cartridge. Be sure that it snaps into place.
  6. Insert the staple cartridge into the stapler and push down on the green handle until it snaps into place.
  7. Close the stapler cover.