HP Color LaserJet Enterprise MFP M680 Series — Toner cartridges

Go back

Control panel walkaround
  • HP Color LaserJet MFP M680 control panel
  • Control panel poster
Guides
  • Control Panel Guide
  • User Guide
HP Color LaserJet MFP M680 CSR parts
  • Staple cartridge
Load the paper trays
  • Load Tray 1
  • Load Tray 2 and the 500-sheet trays
  • Load the 1500-sheet high-capacity input tray
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams from Tray 2 other 500-sheet trays
  • Clear jams in the 1,500-sheet high-capacity input tray and the lower-right door
  • Clear jams in the lower-right door
  • Clear jams in the right door and the fuser area
  • Clear jams in the output bin
  • Clear jams in the document feeder
  • Clear jams from under the top cover
  • Clear paper jams in the stapling mailbox accessory
  • Clear staple jams in the stapling mailbox accessory
  • Clean the scanner and white backing (MFP M680)
  • Clean the document feeder pickup rollers and separation pad (MFP M680)
Product views - HP Color LaserJet MFP M680
  • Product front view
  • Product back view
  • Formatter view
Quick Sets
  • Use a Quick Set
Save to SharePoint® (MFP M680z)
  • Use Save to SharePoint®
Shared CSR parts
  • Toner cartridges
  • Toner collection unit (TCU)
  • Intermediate transfer belt (ITBU)
Standard scan/send features
  • Send a scanned document to one or more email addresses
  • Send a scanned document to a network folder

The product has four toner cartridges. The procedure for replacing all toner cartridges is the same. Toner cartridges are mandatory CSR parts.

NOTE:

It is possible to install each of the color toner cartridges into any cartridge slot. It is important to make sure that the color label on the cartridge matches the color label on the cartridge slot before installing the toner cartridge.



Installing a toner cartridge in the incorrect slot does not damage the product. The product recognizes a toner cartridge is in the incorrect slot and displays a message on the control panel to alert the user.


The black toner cartridge only fits in the black toner cartridge slot.

Click the Play arrow to see how to replace a toner cartridge.

  1. Open the front door by grasping the handle in the upper-left corner of the door and pulling. The door folds down.
  2. Grasp the handle of the toner cartridge and pull out to remove it.
  3. Remove the new toner cartridge from the packaging.
  4. Hold both ends of the toner cartridge, and rock it five to six times.
  5. Remove the protective shield from the toner cartridge.
  6. Align the toner cartridge with the proper slot, and then insert the toner cartridge into the product.
  7. Close the front door.
  8. Place the used cartridge in the packaging, and then recycle to toner cartridges using the instructions provided in the package.