HP LaserJet Enterprise MFP M630 Series — Clean the document feeder pickup rollers and separation pad

Go back

Clear jams
  • Clear jams in the document feeder
  • Clear jams in Tray 1
  • Clear jams in Tray 2, 3, or 4
  • Clear jams in the 1,500-sheet high-capacity input tray (Tray 5)
  • Clear jams in the right door
  • Clear jams in the lower-right door
  • Clear jams in the duplexer and fuser
  • Clear jams under the top cover and in the registration area
  • Clear jams in the output bin
  • Clear jams in the stapling mailbox accessory
  • Clear staple jams in the stapling mailbox accessory
Control panel walkaround
  • HP LaserJet M630 control panel functions
Customer self-repair (CSR) parts and supplies
  • Toner cartridges
  • Staple cartridge
Guides
  • Control Panel Guide
  • User Guide
Load the paper trays
  • Load Tray 1
  • Load Tray 2 and the 500-sheet trays
  • Load the 1500-sheet high-capacity input tray
Maintenance and jam clearing
  • Clean the scanner and white backing
  • Clean the backside scanner
  • Clean the document feeder pickup rollers and separation pad
Product views
  • Product front view
  • Product back view
  • Interface ports
Quick Sets
  • Use a Quick Set
Save to SharePoint® (M630z)
  • Use Save to SharePoint®
Standard scan/send features
  • Send a scanned document to one or more email addresses
  • Send a scanned document to a network folder

Clean the document feeder pickup rollers and separation pad if the document feeder does not correctly pick up pages.

Click the Play arrow below for instructions on cleaning the document feeder pickup rollers and separation pad.

  1. Turn off the product.

  2. Lift the document-feeder latch.

  3. Open the document-feeder cover.

  4. Remove any visible lint or dust from each of the feed rollers and the separation pad using compressed air or a clean lint-free cloth moistened with warm water.

    NOTE:

    Lift up the roller assembly to clean the second roller.

  5. Close the document-feeder cover.

  6. Turn on the product.