HP LaserJet Enterprise MFP M630 Series — Staple cartridge
- Clear jams in the document feeder
- Clear jams in Tray 1
- Clear jams in Tray 2, 3, or 4
- Clear jams in the 1,500-sheet high-capacity input tray (Tray 5)
- Clear jams in the right door
- Clear jams in the lower-right door
- Clear jams in the duplexer and fuser
- Clear jams under the top cover and in the registration area
- Clear jams in the output bin
- Clear jams in the stapling mailbox accessory
- Clear staple jams in the stapling mailbox accessory
- HP LaserJet M630 control panel functions
- Toner cartridges
- Staple cartridge
- Control Panel Guide
- User Guide
- Load Tray 1
- Load Tray 2 and the 500-sheet trays
- Load the 1500-sheet high-capacity input tray
- Clean the scanner and white backing
- Clean the backside scanner
- Clean the document feeder pickup rollers and separation pad
- Product front view
- Product back view
- Interface ports
- Use a Quick Set
- Use Save to SharePoint®
- Send a scanned document to one or more email addresses
- Send a scanned document to a network folder
The staple cartridge is a supply. Customers must replace the cartridge when the staples are depleted.
Click the Play arrow to view an instructional video.
Turn off the product.
Push the release button located on the top and center of the stapling mailbox and pull the mailbox out slightly, ensuring it remains anchored top the product.
Open the stapler door by pushing the release button located at the bottom-right of the door.
Remove the staple cartridge by lifting it up and out by the green handle.
Remove the replacement staple cartridge from the package and recycle the defective or empty staple cartridge as indicated in the replacement packaging.
Reinstall the staple cartridge, and then close the stapler door.
Slide the mailbox in until it clicks into place.
Turn the product on. The stapling mailbox should be operational.