HP LaserJet Enterprise M604, M605, M606 — Load Tray 1

Go back

Clear paper jams
  • Clear paper jams in Tray 1
  • Clear paper jams in Tray 2 and the 500-sheet trays
  • Clear paper jams in the optional 1,500-sheet high-capacity tray
  • Clear paper jams in the toner-cartridge area
  • Clear paper jams in the rear output bin
  • Clear paper jams in the fuser area
  • Clear paper jams in the output bin
  • Clear paper jams in the duplexer
  • Clear paper jams in the envelope feeder
  • Clear paper jams in the 5-bin mailbox
  • Clear paper jams in the stacker or stapler/stacker
  • Clear staple jams in the stapler/stacker
Control panel walkaround
  • Control-panel view (4-line control panel, n and dn models only)
  • Control-panel view (touchscreen control panel, x models only)
Customer self-repair (CSR) A parts and assemblies
  • Toner Cartridge
Load trays
  • Load Tray 1
  • Load Tray 2 and the 500-sheet trays
  • Load the optional 1,500-sheet high-capacity tray
  • Load the optional custom media tray
  • Load envelopes
Product views
  • Product front view
  • Product back view

The following information describes how to load paper in Tray 1. This tray holds up to 100 sheets of 75 g/m2 (20 lb) paper.

CAUTION:

To avoid jams, never add or remove paper from Tray 1 during printing.

  1. Grasp the handle on either side of Tray 1, and pull it forward to open it.

    Open Tray 1

  2. Pull out the tray extension to support the paper.

    Pull out the tray extension

  3. Load paper in the tray.

    Load paper

  4. Make sure that the paper fits under the fill line on the paper guides.

    NOTE:

    The maximum stack height is 10 mm (0.4 in), or approximately 100 sheets of 75g paper.

    Stack-height limit

  5. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

    Adjust the guides