HP PageWide Enterprise Color MFP Managed E58650 — Clear jams in Tray 3 (accessory)

Go back

Clear paper jams
  • Clear jams in the print zone
  • Clear jams in the document feeder
  • Clear jams in the left door
  • Clear jams in Tray 1 (multipurpose tray)
  • Clear jams in Tray 2
  • Clear jams in Tray 3 (accessory)
  • Clear jams in the 3 x 500-sheet feeder
  • Clear jams in the ink-collection unit area
  • Clear jams in the output bin
Copy
  • Make a copy
  • Copy or scan both sides of an ID card
  • Copy or scan pages from books or other bound documents
  • Copy or scan a document into a booklet format
  • Copy on both sides
  • Copy mixed-size documents
  • Reduce or enlarge a copy image
  • Setting paper size and type for copying on special paper
  • Copy a photo
  • Collate a copy job
Customer self-repair (CSR) parts
  • Removal and replacement: Ink cartridges
Fax
  • Send a fax
  • Create and manage fax speed dial lists
Guides
  • User Guide
Load trays
  • Load paper to Tray 1 (multi-purpose tray)
  • Load paper to Tray 2
  • Load paper to Tray 3
  • Load paper to the 3 x 500-sheet paper feeder
Maintenance and troubleshooting
  • Check the scanner glass for dirt and smudges
  • Clean the pickup rollers and separation pad in the document feeder
Print
  • Print from a USB flash drive
  • Print product reports
  • Configuring printer tray settings
  • Store print jobs on the printer to print later or print privately
Print (Windows)
  • Selecting the paper type Windows
Scan/Send
  • Scan to USB Drive
  • Send a scanned document to a folder in the printer memory
  • Scan and send to network folder
  • Scan and send to email

Clear jams in Tray 3 (accessory)

  1. Open the lower-left door.

    Open the jam-access door
  2. Gently pull out any jammed paper.

    Open the jam-access door
  3. Close the lower-left door.

    Close the jam-access door
  4. Pull the tray completely out of the printer by pulling and lifting it up slightly.

    Open the tray
  5. Remove any jammed or damaged sheets of paper. Verify that the tray is not overfilled and that the paper guides are adjusted correctly.

    Remove any damaged paper
  6. Remove any paper from the feed rollers inside the printer. First pull the paper to the right to release it, and then pull it forward to remove it.

    Remove the jammed paper
  7. Reinsert and close the tray.

    Close the tray