Load paper to the 3 x 500-sheet paper feeder
Open the tray.
Do not open this tray while it is in use.
Before loading paper, adjust the paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used. The edge of the tray guide should line up exactly with the marking on the tray.
Adjust the paper-length guide by squeezing the adjustment latch and sliding the guide to the size of the paper being used.
Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. For information about how to orient the paper, see
Close the tray.