Load paper to Tray 2
Open the tray.
Do not open this tray while it is in use.
Before loading paper, adjust the paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used. The edge of the tray guide should line up exactly with the marking on the tray.
Adjust the paper-length guide by squeezing the adjustment latch and sliding the guide to the size of the paper being used.
Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. For information about how to orient the paper, see
Do not adjust the paper guides tightly against the paper stack. Adjust them to the indentations or markings in the tray.
To prevent jams, adjust the paper guides to the correct size and do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.
Close the tray.