HP LaserJet Enterprise M806 — Tray 1

Go back

Control panel walkaround
  • HP LaserJet M806 control panel
Easy-access USB printing
  • Use easy-access USB printing
  • Use the staple/collate feature (optional finishing accessory)
Load the paper trays
  • Tray 1
  • Tray 2
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams in Tray 2 and Tray 3
  • Clear jams in Tray 4 and Tray 5
Print
  • Select staple and hole-punch locations
Product views
  • Front view
  • Back view
  • Formatter view
  • Control-panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet maker
  • Supplies walkaround
Supplies
  • Toner Cartridge
  • Staple cartridge refill
  • 2000-Staple Cartridge Kit (2-pack) for Booklet Maker

NOTE: To avoid jams, do not add or remove paper during printing, and do not load paper above the fill lines on the paper guides.

  1. Open Tray 1
  2. Pull out the tray extension to support the paper.
  3. Load the paper, making sure it is below the limit lines on the paper guides.
  4. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.