HP Color LaserJet Pro M252 — Load paper into Tray 2

Go back

HP Color LaserJet Pro M252 jam clearing
  • Clear paper jams in the single-sheet slot (Tray 1)
  • Clear paper jams in Tray 2
  • Clear paper jams in the duplexer (duplex models only)
  • Clear paper jams in the rear door and the fuser area
  • Clear paper jams in the output bin
Load paper into the single-sheet slot (Tray 1)
  • Load paper into the single-sheet priority feed slot
  • Load an envelope in the single-sheet priority feed slot (Tray 1)
Load paper into Tray 2
  • Load paper into Tray 2
  • Load envelopes in Tray 2
Supplies
  • Toner cartridges

  1. Open the tray.

    Open the tray

  2. Adjust the paper guides by sliding the guides to the size of the paper being used.

    Adjust the guides

  3. To load legal-size paper, extend the tray front by pressing the blue latch and pulling the front of the tray.

    Extend Tray 2 to accept legal-size paper
    NOTE:

    When loaded with legal-size paper, Tray 2 extends from the front of the product approximately 51 mm (2 in).

  4. Load paper into the tray.

    Load paper

  5. Make sure that the paper stack is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.

    NOTE:

    To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

    Slide guides to the paper stack

  6. After making sure that the paper stack is below the tray full indicator, close the tray.

    Close the tray