HP Color LaserJet Enterprise M855 — Staple cartridge refill

Go back

Control panel walkaround
  • HP Color LaserJet M855 control panel
Load trays
  • Tray 1
  • Tray 2
Maintenance and clearing jams
  • Clear jams in Tray 1, the right door, and the fuser
  • Clear jams in Tray 2
  • Clear jams in the output bin
Print
  • Select staple and hole-punch locations
  • Use the staple/collate feature (optional finishing accessory)
  • Use easy-access USB printing
Product views
  • Product front view
  • Product back view
  • Interface ports and security lock
  • Control panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet Maker (with or without hole punch)
  • Supplies walkaround
Supplies
  • Replace a toner cartridge
  • Replace an imaging drum
  • Intermediate transfer belt (ITB)
  • Staple cartridge refill
  • 200-Staple Cartridge Kit (2-pack) for Booklet Maker
  1. Open the front door of the output accessory.
  2. Locate the existing staple cartridge. It is toward the top of the device.
  3. Grasp the colored handle of the installed cartridge, lift up, and then pull the cartridge out.
  4. Recycle the expired staple cartridge, and remove the new cartridge from the packaging.
  5. Grasp the replacement staple cartridge by the handle, insert it into the cartridge bay. and then press down on the handle until the staple cartridge clicks into place.
  6. Close the front door.

    Note: A Staple cartridge 1 very low message displays on the control panel if the staple cartridge is not seated correctly.