HP Color LaserJet Enterprise M855 — Intermediate transfer belt (ITB)

Go back

Control panel walkaround
  • HP Color LaserJet M855 control panel
Load trays
  • Tray 1
  • Tray 2
Maintenance and clearing jams
  • Clear jams in Tray 1, the right door, and the fuser
  • Clear jams in Tray 2
  • Clear jams in the output bin
Print
  • Select staple and hole-punch locations
  • Use the staple/collate feature (optional finishing accessory)
  • Use easy-access USB printing
Product views
  • Product front view
  • Product back view
  • Interface ports and security lock
  • Control panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet Maker (with or without hole punch)
  • Supplies walkaround
Supplies
  • Replace a toner cartridge
  • Replace an imaging drum
  • Intermediate transfer belt (ITB)
  • Staple cartridge refill
  • 200-Staple Cartridge Kit (2-pack) for Booklet Maker
  1. Turn off the product.
  2. Open the right door.
  3. Lift the green handle on the transfer assembly, and then open the panel.
  4. Raise the ITB levers.
  5. Remove the ITB.
  6. Recycle the old ITB.
  7. Remove the replacement ITB from its packaging.
  8. Insert the new ITB into the product, and then lower the ITB levers.
  9. Close the transfer assembly panel.
  10. Close the right door.
  11. Turn on the product.