HP Color LaserJet Enterprise M651 Series — Load Tray 2 and the 500-sheet trays

Go back

Control panel walkaround
  • HP Color LaserJet M651 control panel
Load the paper trays
  • Load Tray 1
  • Load Tray 2 and the 500-sheet trays
  • Load the 1500-sheet high-capacity input tray
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams from Tray 2 other 500-sheet trays
  • Clear jams in the 1,500-sheet high-capacity input tray and the lower-right door
  • Clear jams in the lower-right door
  • Clear jams in the right door and the fuser area
  • Clear jams in the output bin
Product views - HP Color LaserJet M651
  • Product front view
  • Product back view
  • Formatter view
Shared CSR parts
  • Toner cartridges
  • Toner collection unit (TCU)
  • Intermediate transfer belt (ITBU)

NOTE:

The procedure to load paper for the 500-sheet trays is the same as for Tray 2. Only Tray 2 is shown here.

  1. Open the tray.

    NOTE: Do not open this tray while it is in use.

  2. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.
  3. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. For information about how to orient the paper, see the product User Guide or support site.

    NOTE: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

    NOTE: If the tray is not adjusted correctly, an error message might appear during printing or the paper might jam.

  4. Close the tray.
  5. The tray configuration message displays on the product control panel.
  6. Touch the OK button to accept the detected type and size, or touch the Modify button to choose a different paper size or type.

    For custom-size paper, you need to specify the X and Y dimensions for the paper when the prompt displays on the product control panel.

  7. Select the correct type and size, and then touch the OK button.