HP Color LaserJet Managed Flow MFP E57540 — Load Tray 1

Go back

Clear paper jams
  • Clear paper jams in Tray 1
  • Clear paper jams in Tray 2
  • Clear paper jams in the optional 550-sheet trays
  • Clear paper jams in the right door and the fuser area
  • Clear paper jams in the output bin
  • Clear paper jams in the document feeder
Control panel walkaround
  • Control-panel view (touchscreen control panel, x model only)
Customer self-repair (CSR) A assemblies
  • Toner cartridges
Customer self-repair (CSR) B assemblies
  • Intermediate transfer belt (ITB) and secondary transfer roller
Customer self-repair (CSR) parts and supplies
  • Staple cartridge (M577)
Guides
  • User Guide
  • Control Panel Guide
Load the paper trays
  • Load Tray 1
  • Load Trays 2, 3, 4, and 5

The following information describes how to load paper and envelopes into Tray 1. This tray holds up to 100 sheets of 75 g/m2 (20 lb) paper or 10 envelopes.

CAUTION:

To avoid jams, never add or remove paper from Tray 1 during printing.

  1. Open Tray 1.

    Open Tray 1

  2. Pull out the tray extension to support the paper.

    Pull out the tray extension

  3. Spread the paper guides to the correct size, an then load paper in the tray.

    Load paper

  4. Make sure that the paper fits under the fill line on the paper guides.

    Stack-height limit

  5. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

    Adjust the guides