HP LaserJet Managed MFP E52645 — Clean the pickup rollers and separation pad in the document feeder

Go back

Clean the printer
  • Check the scanner glass for dirt and smudges
  • Clean the pickup rollers and separation pad in the document feeder
Clear paper jams
  • Clear paper jams in Tray 1
  • Clear paper jams in Tray 2 and the 550-sheet trays
  • Clear paper jams in the document feeder (MFP M527 models only)
  • Clear paper jams in the toner-cartridge area
  • Clear paper jams in the rear door and the fuser area
  • Clear paper jams in the output bin
  • Clear paper jams in the duplexer
Customer self-repair (CSR) A parts and assemblies
  • Toner Cartridge
  • Staple cartridge (MFP M527)
Guides
  • User Guide
Product views
  • Control panel poster
Set up and configure
  • Load the trays

Follow these steps if the document feeder does not pick up pages correctly or produces skewed output.

  1. Lift the document-feeder latch.

    Lift the latch

  2. Open the document-feeder cover.

    Open the document-feeder cover

  3. Remove any visible lint or dust from each of the feed rollers and the separation pad using compressed air or a clean lint-free cloth moistened with warm water.

    Clean the document feeder

  4. Close the document-feeder cover.

    NOTE:

    Verify that the latch on the top of the document-feeder cover is completely closed.

    Close the document-feeder cover